First level Second level Value Description
Generate Single Modem Tone Range:
1100–2100
Hz
Default =
2100 Hz
Line Measurements
Fax Transmit Signal Loss
Test Support Continuous Scan 2-sided
Save to Disk
Continuous Copy 2-sided
Save to Disk
Raw Scan 2-sided
Mechanical
Calibration
Continuous Print from USB
Automatic Calibrations Disabled
Enabled*
Runtime Configuration MercStine
Standard
StandardEIC
Workflow
WorkflowEIC
Reconfigure
Product resets
Restore factory-set defaults
1. From the Home screen on the product control panel, scroll to and touch the Administration button.
2. Open the following menus:
●
General Settings
●
Restore Factory Settings
3. Select one or more categories of settings from the list, and then touch the Reset button.
ENWW
Service mode functions
381
To Next Page
Loading...