Software installation types for Windows
The product printing-system software can be installed in the following ways:
●
HP LaserJet Enterprise 500 color M551 printing-system installer (Recommended)
●
Microsoft Found New Hardware Wizard (Plug and Play installation)
Installation options
The printing-system software can be used with the product in the following configurations:
●
Install the printing-system software on a computer that is directly connected to the product through
a USB port.
●
Install the printing-system software on a computer that has access to a network, either wired or
wireless, to which the product is connected.
NOTE: A wireless option can be purchased separately.
Detailed Microsoft Windows installation instructions
The dialog boxes shown here appear in the Windows XP Professional installation sequence. The order
and appearance of dialog boxes can vary among operating systems.
Use the installation CD to install the product software
The recommended Easy installation installs the PCL 6 print driver and user guide.
●
For a USB installation, do not connect the USB cable between the product and the computer yet.
You will be instructed to connect the USB cable during the installation process.
●
For a wired network installation, connect the product to the network before starting the installation
process. The product will need a few minutes to receive a network address.
●
For a wireless network installation, do not connect the USB cable between the product and the
computer yet. You will be instructed to connect the USB cable during the installation process.
A series of dialog boxes appears during installation of the product printing-system software in
Windows environments.
ENWW
Detailed Microsoft Windows installation instructions
31
To Next Page
Loading...
