10
Chapter 1 About the Printer
Important Maintenance Notes
To ensure the best performance of the LineJet printer, remember the
following principles whenever you service it.
• Do
not
adjust the platen gap unless:
1) the original shuttle frame assembly or platen has been replaced with a
new or rebuilt unit, or
2) you are instructed to do so in a troubleshooting procedure.
• The hammer springs and hammer tips on the hammer bank are delicate
and precisely aligned.
Never
bend or tweak hammer springs and always
handle hammer springs by the thick mounting base.
• Use only the ribbons specified in Appendix B. Use of incorrect ribbons
can lead to ink migration problems, degraded print quality, and expensive
damage to the printer.
• Never close the forms thickness lever too tightly. Incorrect closure of the
forms thickness lever can lead to smearing, degraded print quality, paper
jams, and damage to the platen and shuttle assembly.
To Next Page
Loading...
