4. Select a Job Storage Mode option.
●
Proof and Hold: Print and proof one copy of a
job and then print more copies.
●
Personal Job: The job does not print until
you request it at the product control panel.
For this job-storage mode, you can select
one of the Make Job Private/Secure options.
If you assign a personal identication
number (PIN) to the job, you must provide
the required PIN at the control panel. If you
encrypt the job, you must provide the
required password at the control panel.
●
Quick Copy: Print the requested number of
copies of a job and then store a copy of the
job in the product memory so you can print it
again later.
●
Stored Job: Store a job on the product and
allow other users to print the job at any time.
For this job-storage mode, you can select
one of the Make Job Private/Secure options.
If you assign a personal identication
number (PIN) to the job, the person who
prints the job must provide the required PIN
at the control panel. If you encrypt the job,
the person who prints the job must provide
the required password at the control panel.
ENWW Store print jobs on the product 115
To Next Page
Loading...
