●
General Settings
●
Print Quality
●
Auto Sense Behavior
3. Select one of the auto-sense modes.
Full sensing (Tray 1 only) For each sheet of paper that it picks up from the tray, the product detects light paper,
plain paper, heavy paper, glossy paper, tough paper, and transparencies.
Expanded sensing
NOTE: This is the default setting for all
trays.
For the rst few sheets of paper that it picks up from the tray, the product detects light
paper, plain paper, heavy paper, glossy paper, tough paper, and transparencies. The
product assumes the rest of the pages are of the same type.
Transparency Only The product distinguishes between transparencies and non-transparencies. This setting
provides the fastest printing, but for some paper types it might reduce print quality.
38 Chapter 3 Input trays and output bins ENWW
To Next Page
Loading...
