3. If paper is visible entering the bottom of the
fuser, gently pull downward to remove it.
CAUTION: Do not touch the transfer roller
(callout 1). Contaminants on the roller can
affect print quality.
1
4. Paper could be jammed inside the fuser where
it would not be visible. Open the fuser jam
access door. If paper is jammed inside the
fuser, gently pull it straight up to remove it. If
the paper tears, remove all paper fragments.
WARNING! Even if the body of the fuser
has cooled, the rollers that are inside could still
be hot. Do not touch the fuser rollers until they
have cooled.
If no paper is found but the product still reports
a jam, remove the fuser to check for jammed
paper inside the fuser cavity. Remove any
paper, and then reinstall the fuser.
NOTE: Make sure that the fuser is reinstalled
correctly before closing the upper right door.
5. Close the upper right door.
ENWW
Clear jams
185
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...