Load Tray 2, Tray 3, and optional Trays 4, 5, and 6 with custom-
size paper
1. Open the tray.
2. Adjust the paper-length and paper-width
guides by squeezing the adjustment latches
and sliding the guides to the size of the paper
being used.
NOTE: It might be easier to load the custom-
size paper first, and then adjust the guides.
3. Load paper into the tray. Check the paper to
verify the guides lightly touch the stack, but do
not bend it.
ENWW
Load paper trays
83
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...