Cancel a copy job
1. Press the Stop button on the control panel and then touch the name of the job.
2. Touch the Cancel Job button, and then touch the OK button.
Reduce or enlarge a copy image
1. From the Home screen, touch the Copy button.
2. Touch the Reduce/Enlarge button.
3. Select one of the predefined percentages, or
touch the Scaling field and type a percentage
between 25 and 400. Touch the OK button.
You can also select these options:
●
Auto: The product automatically scales the
image to fit the paper size in the tray.
●
Auto Include Margins: The product
reduces the image slightly to fit the entire
scanned image within the printable area
on the page.
NOTE: To reduce the image, select a scaling
percentage that is less than 100. To enlarge
the image, select a scaling percentage that is
greater than 100.
4. Touch the Start button.
ENWW
Use copy functions
157
To Next Page
Loading...
