Change jam recovery
This product provides a jam recovery feature that reprints jammed pages.
1. From the Home screen, touch the
Administration button.
2. Open the General Settings menu, and then
open the Jam Recovery menu.
3. Select one of the following options:
●
Auto — The product attempts to reprint
jammed pages when sufficient memory is
available. This is the default setting.
●
Off — The product does not attempt to
reprint jammed pages. Because no
memory is used to store the most recent
pages, performance is optimal.
NOTE: When using this option, if the
product runs out of paper and the job is
being printed on both sides, some pages
can be lost.
●
On — The product always reprints
jammed pages. Additional memory is
allocated to store the last few pages
printed. This might cause overall
performance to suffer.
296 Chapter 13 Solve problems ENWW
To Next Page
Loading...
