HP LaserJet Enterprise M4555 - Page 58

In the following table, asterisks (*) indicate the factory default setting.
Table 2-11 Manage Trays menu
First level Values
Use Requested Tray Exclusively*
First
Manually Feed Prompt Always*
Unless loaded
Size/Type Prompt Display*
Do not display
Use Another Tray Enabled*
Disabled
Alternative Letterhead Mode Disabled*
Enabled
Duplex Blank Pages Auto *
Yes
Override A4/Letter Yes*
No
Stapler/Stacker Settings menu
To display: At the product control panel, select the Administration menu, and then select the Stapler/
Stacker Settings menu.
In the following table, asterisks (*) indicate the factory default setting.
Table 2-12 Stapler/Stacker Settings menu
First level Values
Operation Mode Mailbox
Stacker
Function Separator
38 Chapter 2 Control panel menus ENWW