HP LaserJet Enterprise M506 - Declaration of Conformity

Declaration of conformity
Declaration of Conformity
according to ISO/IEC 17050-1 and EN 17050-1
Manufacturer's Name: Hewlett-Packard Company DoC#: BOISB-1403-00-rel.2.0
Manufacturer's Address: 11311 Chinden Boulevard
Boise, Idaho 83714-1021, USA
declares, that the product
Product Name and Model: HP LaserJet Enterprise M506n, HP LaserJet Enterprise M506dn, and HP LaserJet Enterprise M506dh
Regulatory Model Number:
1)
BOISB-1403-00
Product Options: F2A72A – 550-sheet Paper Tray
F2A73A – 550-sheet Paper Tray and Cabinet
Toner Cartridges: CF287A (black), CF287X (high capacity black)
conforms to the following Product Specifications:
SAFETY: IEC 60950-1:2005 +A1:2009 +A2:2013
EN 60950-1:2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013
IEC 60825-1:2007 / EN 60825-1:2007 (Class 1 Laser Product)
IEC 62479:2010 / EN 62479:2010
EMC:
CISPR 22:2008 / EN55022:2010 - Class A
2)
EN 61000-3-2:2006 +A1:2009 +A2:2009
EN 61000-3-3:2008
EN 55024:2010
FCC CFR 47 Part 15 Class A / ICES-003, Issue 5 Class A
RoHS: EN 50581:2012
The product herewith complies with the requirements of the EMC Directive 2004/108/EC, the Low Voltage Directive 2006/95/EC, the RoHS Directive
2011/65/EC, and carries the CE-Marking
accordingly.
Additional Information:
1. This product is assigned a Regulatory Model Number which stays with the regulatory aspects of the design. The Regulatory Model Number is
the main product
identifier
in the regulatory documentation and test reports; this number should not be confused with the marketing name or
the product numbers.
2. The product meets the requirements of EN55022 & CNS13483 Class A in which case the following applies: “Warning – This is a class A product.
In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures”.
Boise, Idaho USA
February 2015
For Regulatory Topics only, contact:
30 Chapter 3 Regulatory information ENWW