HP LaserJet Enterprise M552 - Page 124

Table 2-6 Pre-boot menu options (6 of 7) (continued)
Menu option First level Second level Third level Description
Administrator
(continued)
Diagnostics
(continued)
Disk
(continued)
Optimized Use the Optimized item to select a test that checks
the active sectors on the disk.
NOTE: This test requires about thirty minutes to
execute.
Raw Use the Raw item to select a test that checks every
sector on the disk.
NOTE: This test requires about fty minutes to
execute.
Smart Use the Smart item to select a very brief test that
checks the drive self-monitoring analysis and
reporting technology (SMART) status—the drive
detects and reports reliability indicators to help
anticipate disk failures (SMART status).
Run Selected Select the Run Selected item to execute a selected
test.
NOTE: If more than one test is selected, they are
executed in sequence.
Table 2-7 Pre-boot menu options (7 of 7)
Menu option First level Second level Third level Description
Administrator
(continued)
Remote Admin Start Telnet The Remote Admin item allows a service technician to access
to the printer Pre-boot menu remotely, and to navigate the
menu selections from a remote location.
IMPORTANT: A Remote Admin connection must be initiated
by a person that is physically present at the printer.
This person will also need to provide a randomly generated
PIN to the remote service technician.
NOTE: For more information about using the Remote Admin
function, see Remote Admin on page 98.
Stop Telnet
Refresh IP
System Triage Copy Logs If the device will not boot to the Ready state, or the diagnostic
log feature found in the Troubleshooting menu is not
accessible, then use the System Triage item to copy the
diagnostic logs to a USB ash drive at the next printer start up.
The les can then be sent to HP to help diagnose the problem.
Change Svc PWD Use this item to change the Service menu personal
identication number (PIN).
Reset Svc PWD If the Service menu personal identication number (PIN) has
been changed, use this item to reset it to the original PIN.
96 Chapter 2 Solve problems ENWW