1. From the Pre-boot main menu, use the arrow buttons on the keyboard to scroll down to the
+3:Administrator item, and then press the Enter key.
Figure 2-18 Access the administrator menu
2. Use the arrow buttons on the keyboard to scroll down to the +A:Remote Admin item, and then press the
Enter key.
Figure 2-19 Access the remote admin menu
3. Use the arrow buttons on the keyboard to scroll down to the 2:Stop Telnet item, and then press the
Enter key. The Remote Admin connection between the printer and the remote telnet client computer
terminates.
IMPORTANT: The printer remains in the Pre-boot menu. Have the person that is physically present at
the printer do the following:
●
Touch the Home button to return to the main Pre-boot menu and highlight the 1:Continue item,
and then touch the OK button. The printer will continue to initialize.
ENWW Solve problems checklist 105
To Next Page
Loading...