For example, opening the atbed cover increments the Flatbed cover Toggle item count two times
—once when the door is opened, and once when the door is closed.
5. Touch the Reset Sensors button to reset the Toggle count item.
-or-
Touch the Cancel button to exit the Scanner Tests screen, and then touch the Cancel button again to
return to the Diagnostic Tests menu.
Scanner tests sensors
●
ADF paper present
●
ADF Y (length)
●
ADF jam cover
●
ADF paper path deskew
●
ADF paper path pick success
●
Paper path sensor 1(unreachable)
●
Paper path sensor 2 (unreachable)
●
Flatbed Y (length)
●
Flatbed cover
ENWW Tools for troubleshooting 159
To Next Page
Loading...