Table 2-34 Copy Settings menu (M577 only) (continued)
First level Second level Third level Values Description
Booklet
(continued)
Sides 1-sided original, 1-sided
output*
2-sided original, 2-sided
output
1-sided original, 2-sided
output
2-sided original, 1-sided
output
Use to indicate whether the
original document is
printed on one or both
sides, and whether the
copies should be printed on
one or both sides. For
example, select 1-sided
original, 2- sided output
when the original is printed
on one side, but you want
to make two-sided copies.
Borders on Each Page To print a border around
each page, select the
Borders on Each Page
option.
Paper Selection Manually feed
Automatic
Tray 1: [Type], [Size]
Tray <X>: [Type], [Size]
For the best color and
image quality, select the
appropriate paper type
from the control panel
menu or from the print
driver.
Edge-to-Edge Normal (recommended)*
Edge-to-Edge output
Use to avoid shadows that
can appear along the edges
of copies when the original
document is printed close
to the edges. Combine with
the Reduce/Enlarge feature
to ensure that the entire
page is printed on the
copies. When the Edge-to-
Edge feature is turned on,
the product minimizes
margins and prints as close
to the edge of the paper as
possible.
Job Build Job Build o*
Job Build on
Use to combine several
original documents into
one job. Also use this
feature to scan an original
document that has more
pages than the document
feeder can accommodate at
one time. The product
temporarily saves all the
scanned images. After you
have scanned all the pages
for the job, touch the Finish
option to nish the job.
ENWW Tools for troubleshooting 207
To Next Page
Loading...