Table 2-44 Embedded Jetdirect Menu (continued)
First level Second level Third level Fourth level Values Description
Diagnostics (M552,
M553)
(continued)
Ping Results
(continued)
Packets Received Default = 00000 Shows the number of
packets (0 - 65535)
received from the
remote host since the
most recent test was
initiated or completed.
The default is 0.
Percent Lost Default = 000 Shows the percent (0
to 100) of ping test
packets that were
sent with no response
from the remote host
since the most recent
test was initiated or
completed.
RTT Min Default = 0000 Shows the minimum
detected roundtrip-
time (RTT), from 0 to
4096 milliseconds, for
packet transmission
and response.
RTT Max Default = 0000 Shows the maximum
detected roundtrip-
time (RTT), from 0 to
4096 milliseconds, for
packet transmission
and response.
RTT Average Default = 0000 Shows the average
round-trip-time (RTT),
from 0 to 4096
milliseconds, for
packet transmission
and response.
Ping In Progress Yes
No*
Shows whether a ping
test is in progress. Yes
Indicates a test in
progress. No Indicates
that a test completed
or was not run.
Refresh Yes
No*
When viewing the ping
test results, this item
upgrades the ping test
data with current
results. Select the Yes
option to upgrade the
data, or the No option
to maintain the
existing data.
However, a refresh
automatically occurs
when the menu times
out or the user
manually returns to
the main menu.
ENWW Tools for troubleshooting 255
To Next Page
Loading...