Easy-access USB port
This printer features easy-access USB printing, for quickly printing les without sending them from a
computer. The printer accepts standard USB ash drives in the USB port near the control panel. It supports
the following types of les:
●
.pdf
●
.prn
●
.pcl
●
.ps
●
.cht
The USB port is disabled by default. Follow the instructions in the printer user guide to enable the USB port
and print USB documents.
Wireless
The M553x and M577z models contain a wireless card to enable wireless direct printing over a 802.11b/g/n
wireless connection.
NOTE: This card does not enable the printer to connect to the network.
Near eld communication (NFC)
The M553x and M577z models support NFC capabilities. NFC enables a connection between the printer and a
mobile device, such as a smartphone or tablet, by touching the device to the NFC icon on the bottom of the
control panel. Documents and images from the mobile device can then be printed through the wireless card
on the printer
CPU
The formatter incorporates a 1.2 GHz processor.
Input/output (I/O)
The printer has three I/O interfaces:
●
Hi-Speed USB 2.0
●
10/100/1000 Ethernet LAN connection with IPv4 and IPv6
●
Easy-access USB printing (no computer required)
Memory
The formatter incorporates dierent types of memory and storage to store the printer rmware as well as
print-job data and user settings.
ENWW Formatter-control system 9
To Next Page
Loading...