2. Carefully remove any jammed paper.
3. Close the door on the stacker or stapler/stacker, and close the
rear output bin.
NOTE: The output bin must be pushed down into the lowest
position for printing to continue.
Clear staple jams in the stapler/stacker
Use the following procedure to clear staple jams in the stapler/stacker. When a jam occurs, the control panel
displays an animation that assists in clearing the jam.
The stapler needs to reload after clearing a staple jam, so the first few documents might not be stapled. If a
print job is sent and the stapler is jammed or is out of staples, the job will still print as long as the path to the
stacker bin is not blocked.
ENWW Clear paper jams 117
To Next Page
Loading...