HP LaserJet Enterprise M604 - Load the optional custom media tray

Load the optional custom media tray
Introduction
The following information describes configuring the product to use the optional custom media tray (part
number F2G75A) and loading paper into this tray. The custom media tray fits into the Tray 2 position only,
and it holds smaller size paper than the standard tray in the Tray 2 position. It supports these paper sizes:
●
Statement
●
5 x 7
●
5 x 8
●
A5
●
A6
●
B6 (JIS)
●
Double Japan Postcard Rotated
●
Double Postcard (JIS)
NOTE: The stapler does not support any of the paper sizes that the custom media tray supports. The
automatic duplexer supports A5 size when paper is loaded with the short-edge first, but it does not support
any of the other sizes that the custom media tray supports.
Configure the product for the custom media tray
1. Press the Home button on the product control panel.
2. Open the following menus:
●
Administration
●
Manage Trays
●
Tray 2 Model
3. Select Custom Tray.
4. Press OK.
32 Chapter 2 Paper trays ENWW