●
Energy Settings
●
Sleep Timer Settings
3. 4-line control panels only: Select Sleep/Auto Off Timer, and then select Enabled. Press the OK button.
4. Select Sleep /Auto Off After.
5. Use the keypad to enter the appropriate time period, and then touch the Save button, or press the OK
button.
NOTE: The sleep-mode default time is 1 minute.
6. Select one of the Wake/Auto On to These Events options:
●
All events: The product wakes when it receives any print job (through the USB port, network port,
or wireless connection), or when someone presses a button on the control panel, or opens any
door or tray.
●
Network port: The product wakes when it receives a print job sent through the network port, or
when someone presses a button on the control panel, or opens any door or tray. With this setting,
the product uses 1 watt or less of power while in the Sleep/Auto Off state.
●
Power button only: The product wakes only when someone presses the power button. With this
setting, the product uses 1 watt or less of power while in the Sleep/Auto Off state.
ENWW Economy settings 81
To Next Page
Loading...