Pre-boot menu options
The Pre-boot menus are available prior to the printer initializing.
CAUTION: The Format Disk option (printers with a hard-disk drive only) performs a disk initialization for the
entire disk. The operating system, rmware les, and third party les (among other les) will be completely
lost. HP does not recommend this action.
TIP: The Pre-boot menu can be remotely accessed by using a telnet network protocol to establish an
administration connection to the printer. See Remote Admin on page 97.
Open the Pre-boot menu from a touchscreen control panel
1. Touch the middle of the control-panel display when you see the 1/8 under the logo.
Figure 2-1 Open the Pre-boot menu
ENWW Solve problems checklist 87
To Next Page
Loading...