NOTE: The printer will initialize.
NOTE: Some of the pre-boot options in the following tables are not supported by the current version of the
printer rmware and are included for information only. Future versions of rmware will support these
options.
Table 2-1 Pre-boot menu options (1 of 7)
Menu option First level Second level Third level Description
Continue Selecting the Continue item exits the Pre-boot menu and
continues the normal boot process.
If a selection is not made in the initial menu within 30
seconds, the printer returns to a normal boot (the same as
selecting Continue).
If the user navigates to another menu, the timeout does not
apply.
Sign In Enter the administrator PIN or service PIN if one is required
to open the Pre-boot menu.
Administrator This item navigates to the Administrator submenus.
If authentication is required (and the user is not already
signed in) the Sign In prompt displays. The user is required to
sign in.
Download Network
USB
USB Thumbdrive
This item initiates a Pre-boot rmware download process. A
USB Thumbdrive option will work on all FutureSmart
printers. USB or Network connections are not currently
supported.
Format Disk This item reinitializes the disk and cleans all disk partitions.
CAUTION: Selecting the Format Disk item removes all data.
A delete conrmation prompt is not provided.
The system is not bootable after this action and a 99.09.67
error displays on the control panel. A rmware download
must be performed to return the system to a bootable state.
Partial Clean This item reinitializes the disk (removing all data except the
rmware repository where the master rmware bundle is
downloaded and saved).
CAUTION: Selecting the Partial Clean item removes all data
except the rmware repository. A delete conrmation
prompt is not provided.
CAUTION: This procedure resets all printer congurations
and settings to factory defaults (customer congurations
and settings are lost).
This allows a user to reformat the disk by removing the
rmware image from the active directory without having to
download new rmware code (printer remains bootable).
90 Chapter 2 Solve problems ENWW
To Next Page
Loading...