HP LaserJet Enterprise M607n - Page 120

Table 2-5 Pre-boot menu options (5 of 7) (continued)
Menu option First level Second level Third level Description
Administrator
(continued)
Startup Options
(continued)
First Power Not currently functional: This item allows the printer to
initialize as if it is the rst time it has been turned on.
For example, the user is prompted to congure rst-time
settings like date/time, language, and other settings.
Select this item so that it is enabled for the next time the
printer power is turned on.
When the printer power is turned on the next time, this
item is unchecked so that the pre-congured settings are
used during conguration, and the rst-time setting
prompt is not used.
Embedded Jetdirect
O
Select the Embedded Jetdirect O item to disable the
embedded HP Jetdirect.
By default this item is unchecked so that HP Jetdirect is
always enabled.
WiFi Accessory Select the WiFi Accessory item to enable the wireless
accessory.
Table 2-6 Pre-boot menu options (6 of 7)
Menu option First level Second level Third level Description
Administrator
(continued)
Diagnostics Diagnostic items are useful to diagnose
hardware components and their interface
connections. Use these items to
troubleshoot specic hardware
components, and the interface between
them and other components.
Memory Do Not Run Use the Do Not Run item to exclude the
Memory diagnostic when executing
multiple diagnostics.
Short Use the Short item to select a brief
memory test.
NOTE: This test requires about four
minutes to execute.
Long Use the Long item to select an extended
memory test.
NOTE: This test requires about twenty
minutes to execute.
Disk Do Not Run Use the Do Not Run item to exclude the
Disk diagnostic when executing multiple
diagnostics.
Short Use the Short item to select a brief
rmware self-test.
NOTE: This test requires about two or
three minutes to execute.
94 Chapter 2 Solve problems ENWW