Control-panel system diagnostics (touchscreen models)
Use the diagnostics in this section to test the control-panel hardware and display using the printer rmware
system diagnostics.
●
Open the control-panel system diagnostic tests
●
Screen test
●
Touch test
●
SoftKey test
●
Backlight test
●
Sound test
●
Keyboard test (M632z/633z only)
●
Version
Open the control-panel system diagnostic tests
Open the control-panel system diagnostic tests from a touchscreen control panel
1. Turn the printer power o, and then on again.
2. Touch the middle of the control-panel display when you see the 1/8 under the logo.
Figure 2-26 Open the Pre-boot menu
ENWW Troubleshooting process 119