Version
1. Open the control-panel system diagnostic tests. See Open the control-panel system diagnostic tests
on page 119.
2. Use the down arrow button to scroll to 7 Version, and then press the OK button to select it.
NOTE: Touch any key to exit the test.
Select 7 Version to view the following types of information:
NOTE: The following types of information are for the control panel only, not the printer.
●
Panel ID
●
Hardware (version)
●
Firmware (version)
●
KB Hw (version)
●
KB Firm (version)
●
LCD Vendor
●
Touch Controller Version
Figure 2-41 Open the sound test
ENWW Troubleshooting process 133
To Next Page
Loading...