Tools for troubleshooting: Scanner tests (MFP)
Use these diagnostic tests to manually test the fax module.
Run fax test (MFP)
This section lists describes accessing the Run Fax Test procedure.
Access the run fax test from a MFP touchscreen control panel
1. From the Home screen on the printer control panel, swipe (right), and then touch the Support Tools
button.
2. Open the following menus:
●
Troubleshooting
●
Diagnostic Tests
●
Run Fax Test
3. Select from the following:
●
Done (return to the Troubleshooting menu)
●
Start (starts the test)
158 Chapter 2 Solve problems ENWW
To Next Page
Loading...