HP LaserJet Enterprise M607n - Page 241

Table 2-50 Copy menu (MFP models only) (continued)
First level Second level Third level Fourth-level Description
Image Adjustment Sharpness
Darkness
Contrast
Background Cleanup
Use the sliders to adjust the
values for these items.
Optimize Text/Picture Text
Mixed
Printed picture
Photograph
Use this to improve print
quality.
Edge-to-Edge Normal (recommended)
Edge-to-Edge
Use to avoid shadows that
can appear along the edges
of copies when the original
document is printed close
to the edges.
Combine with the Reduce/
Enlarge feature to ensure
that the entire page is
printed on the copies
When the Edge-to-Edge
feature is turned on, the
product minimizes margins
and prints as close to the
edge of the paper as
possible.
Erase Edges Apply same width to all
edges (check box)
Top Edge
Bottom Edge
Left Edge
Right Edge
Use this to remove
blemishes, such as dark
borders or staple marks, by
cleaning the specied
edges of the scanned
image. In each of the text
boxes enter the
measurements, in inches,
for how much of the top
edge, bottom edge, left
edge, and right edge to
clean.
Collate Collate on
Collate o
If you are making more
than one copy, select the
Collate on option to
assemble the pages in the
correct order in each set of
copies.
Multi-feed Detection On
O
When enabled, scanning
stops if HP EveryPage
technology detects
multiple pages being fed at
one time.
When disabled, this feature
will not stop scanning when
multi-feeds are detected.
ENWW Tools for troubleshooting 215