EasyManua.ls Logo

HP LaserJet Enterprise M607n - The printer does not print or it prints slowly; The printer prints slowly

HP LaserJet Enterprise M607n
430 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Density control sequence; occurs every 150 pages and takes about 120 seconds
The printer does not print or it prints slowly
The printer does not print
If the printer does not print at all, try the following solutions.
1. Make sure the printer is turned on and that the control panel indicates it is ready.
If the control panel does not indicate the printer is ready, turn the printer o and then on again.
If the control panel indicates the printer is ready, try sending the job again.
2. If the control panel indicates the printer has an error, resolve the error and then try sending the job
again.
3. Make sure the cables are all connected correctly. If the printer is connected to a network, check the
following items:
Check the bottom LED next to the network connection on the printer. If the network is active, the
light is green.
Make sure that a network cable and not a phone cord is used to connect to the network.
Make sure the network router, hub, or switch is turned on and that it is working correctly.
4. Install the HP software for the printer. Using generic printer drivers can cause delays clearing jobs from
the print queue.
5. From the list of printers on your computer, right-click the name of this product, click Properties, and
open the Ports tab.
If a network cable is used to connect to the network, make sure the printer name listed on the
Ports tab matches the one on the printer conguration page.
If a USB cable is used, and the printer is connected to a wireless network, make sure the box is
checked next to Virtual printer port for USB.
6. If a personal rewall system on the computer is used, it might be blocking communication with the
printer. Try temporarily disabling the rewall to see if it is the source of the problem.
7. If the host computer or the printer is connected to a wireless network, low signal quality or interference
might be delaying print jobs.
The printer prints slowly
The printer prints slowly
If the printer prints, but it seems slow, try the following solutions.
1. Make sure the computer meets the minimum specications for this printer. For a list of specications, go
to this Web site: www.hp.com/support/ljM607, www.hp.com/support/ljM608, or www.hp.com/support/
ENWW Solve performance problems 359

Table of Contents

Related product manuals