HP LaserJet Enterprise M607n - Printer Space Requirements; Operating Environment Range

Table 2-85 Service menu (continued)
First level Second level Third-level Value Description
Copy Pages Count (MFP
only)
Set the number of scanned
pages that have been
printed.
Scanner Settings (MFP only) Edge to Adjust Glass: Rear Edge
Glass: Left Edge
ADF: Leading front
edge
ADF: Leading Back
back
ADF: Trailing Front
edge
ADF:Left Side Front
ADF:Left Side Back
Adjustment Set the calibration values.
NOTE: Adjustments are in
millimeters (-20 to 20).
Clear All Clear all adjustment values
(set to zero).
Done Done exits the menu.
Serial Number Done Set the serial number.
Done exits the menu.
Service ID Done Use this item to show the
date that the printer was
rst used on the control
panel. This eliminates the
need for users to keep paper
receipts for proof of
warranty.
Done exits the menu.
Cold Reset Paper Letter
A4
When you perform a cold
reset, the paper size that is
stored in NVRAM is reset to
the default factory setting. If
you replace a formatter
board in a country/region
that uses A4 as the standard
paper size, use this menu to
reset the default paper size
to A4. LETTER and A4 are the
only available values.
MPS Settings Low Alerts On On
O
Use this to congure
managed services specic
settings.
368 Chapter 2 Solve problems ENWW