HP LaserJet Enterprise M607n - Page 395

Table 2-85 Service menu (continued)
First level Second level Third-level Value Description
Reset Supplies level
●
Reset to level 1
●
Reset to level 2
●
Reset to level 3
●
Reset to non-
HP managed
mode
Cancel
PTT Test Mode (fax models
only)
Hook Operations Go O Hook
Go On Hook
Test the internal modem for
the analog fax accessory.
Generate Random Data Done
Start
Select a value from the list.
Generate Dialing Tones/
Pulses
Pulse Burst
Tone Burst
Continuous Tone
Stop
Done
Enter a value.
Generate Pulse Dial
Number
Generate/Dial Phone
Number
Pulse
Tone
Phone Number Enter dial number.
Generate Single Modem
Tone
1100 Hz
2100 Hz
1300 Hz
1800 Hz
Done
Start
Select a value, and then
select Start.
Fax Transmit Signal Loss Enter a value (0 to
30).
Ring Settings Ring Interval
Ring Frequency High
Limit
PBX Ring Detect
ms (0 to 600
Hz (0 to 100)
On or O
Test Support Continuous Scan (MFP
only)
2-sided
Save to Disk
Done
Start
Continuous Copy (MFP
only)
2-sided
Save to Disk
Done
Start
Raw Scan (MFP only) 2-sided
Mechanical
Calibration
Done
Start
Continuous Print from
USB
Done
Start
NOTE: Insert a USB ash
drive into the USB port on
the printer.
ENWW Service mode functions 369