HP LaserJet Enterprise M607n - Printer space requirements; Power consumption, electrical specifications, and acoustic emissions; Operating environment range

Printer space requirements
HP recommends that the following distances be added to the printer dimensions provided in this chapter to
make sure there is sucient space to open doors and covers, and to provide proper ventilation. See {Xref
Error! Target does not exist.} or {Xref Error! Target does not exist.} .
●
From the left-side or right-side of the printer to an obstruction, add:
◦
430 mm (17 in)
●
From the front-side of the printer to an obstruction, add:
◦
610 mm (24 in)
●
From the back-side of the printer to an obstruction, add:
◦
460 mm (18 in)
Power consumption, electrical specications, and acoustic
emissions
See www.hp.com/support/ljM607, www.hp.com/support/ljM608, or www.hp.com/support/ljM609,
www.hp.com/support/ljM631MFP, www.hp.com/support/ljM632MFP, or www.hp.com/support/ljM633MFP for
current information.
CAUTION: Power requirements are based on the country/region where the printer is sold. Do not convert
operating voltages. This will damage the printer and void the printer warranty.
Operating environment range
Table
A-24 Operating environment range
Environment Recommended Allowed
Temperature 17° to 25°C (62.6° to 77°F) 15° to 32.5°C (59° to 90.5°F)
Relative humidity 30% to 70% relative humidity (RH) 10% to 80% RH
Altitude Not applicable 0 to 3048 m (0 to 10,000 ft)
394 Appendix A Printer specications ENWW