Cleaning page
1. From the Home screen on the product control panel, scroll to and touch the Device Maintenance
button.
2. Open the following menus:
●
Calibration/Cleaning
●
Cleaning Page
3. Touch the Print button to print the page.
4. The cleaning process can take several minutes. When it is finished, discard the printed page.
Set up an auto cleaning page
Use the procedure in this section to set up an automatic cleaning page.
1. From the Home screen on the product control panel, scroll to and touch the Device Maintenance
button.
2. Open the following menus:
●
Calibration/Cleaning
●
Cleaning Settings
3. Select the Auto Cleaning item, and then select values for the Cleaning Interval option and the
Cleaning Size option. Touch the OK button.
196 Chapter 2 Solve problems ENWW
To Next Page
Loading...