HP LaserJet Enterprise M806 - Staple and Hole Punch Output Options

Table 5-4 Two staples stapling options by paper size – Short edge tray feed orientation
Paper size Image orientation Two Staples Left or
Top
Two Staples Left Two Staples Right Two Staples Top
Letter
216 x 279 mm (8.5 x
11 in)
A4
210 x 297 mm (8.3 x
11.7 in)
Ledger
279 x 432 mm (11 x
17 in)
A3
279 x 420 mm (11.7 x
16.5 in)
B4 (JIS)
257 x 364 mm (10.1 x
14.3 in)
Legal
216 x 330 mm (8.5 x
13 in)
Oficio
216 x 340 mm (8.5 x
13.4 in)
8K
270 x 390 mm (10.6 x
15.3 in)
Portrait
Aa
123
Not supported Not supported
Aa
123
Landscape
Aa
123
Aa
123
Aa
123
Not supported
Staple and hole punch output options
1 Staple and 2 hole punch
The following staple and hole punch option tables by paper size for the HP LaserJet Enterprise M806 and HP
LaserJet Enterprise flow MFP M830 applies to these devices:
The following hole punching and stapling options table applies to these devices:
●
HP Stapler/Stacker with 2/3 Hole Puncher — Mailbox Mode — CZ995A
●
HP Stapler/Stacker with 2/3 Hole Puncher — Stacker Mode — CZ995A
●
HP Stapler/Stacker with 2/4 Hole Puncher — Mailbox Mode — CZ996A
●
HP Stapler/Stacker with 2/4 Hole Puncher — Stacker Mode — CZ996A
130 Chapter 5 How to use the staple/collate feature (optional finishing accessory) ENWW