For recycling information, go to www8.hp.com/us/en/hp-information/environment/product-recycling.html.
NOTE: HP recommends responsible disposal of the defective booklet maker.
1. Remove all of the shipping tape from outside the accessory.
2. Open the front door of the accessory, and then remove all of the shipping tape and packing materials
from inside the accessory.
Close the front door.
CAUTION: Make sure that you remove all of the shipping material from inside the accessory.
ENWW Install or replace a stapler/stacker with booklet maker accessory for the HP LaserJet Enterprise M806
and HP LaserJet Enterprise flow MFP M830
49
To Next Page
Loading...