3. In the Copy Settings area, set the paper size, for example Ledger (11 x 17 in) or A3 279 x 420 mm, by
clicking the Paper Selection icon. Select the appropriate tray with the loaded paper size.
4. Click Apply.
3: Configure the Sides feature for single or duplex printing
Use this feature to indicate whether the original document is printed on one or both sides, and whether the
copies should be printed on one or both sides. For example, select 1-sided original, 2-sided output when the
original is printed on one side, but you want to make two-sided copies.
1. Find the Sides icon and click it.
Select 1-sided original, 2-sided output or the appropriate setting for the originals being used.
54 Chapter 2 Install and configure the finishing accessories ENWW
To Next Page
Loading...