4. Completely remove the finishing accessory.
Step two: Unpack the optional or replacement booklet maker accessory
Unpack the booklet maker from the packaging.
NOTE: Remove all tape and packing material from outside the accessory. Open all doors and remove all
tape and packing material from inside the accessory.
For recycling information, go to www8.hp.com/us/en/hp-information/environment/product-recycling.html.
NOTE: HP recommends responsible disposal of the defective booklet maker.
1. Remove all of the shipping tape from the outside of the accessory.
66 Chapter 2 Install and configure the finishing accessories ENWW
To Next Page
Loading...