●
Hole Punching drop-down menu: select the position and number of holes to punch. The following
hole punch options are available:
◦
None
◦
Two left or top
◦
Two left
◦
Two right
◦
Two top
◦
Two bottom
◦
Four left or top
◦
Four left
◦
Four right
◦
Four top
●
Staple Speed drop-down menu: select the appropriate staple speed:
◦
Automatic
◦
Fast
◦
Slow
5. Scroll to the bottom of the page, and click OK.
Step four: Configure the Staple/Collate settings
1. Click the Copy/Print tab.
2. In the left navigation pane, click the Copy Settings link.
78 Chapter 2 Install and configure the finishing accessories ENWW
To Next Page
Loading...