3. In the Copy Settings area, click Staple/Collate (scroll if necessary).
4. In the Staple/Collate area, do the following:
●
Select the position and number of the staples. The following staple options are available:
◦
None
◦
Top left angled
◦
Top right angled
◦
Two left
◦
Two right
◦
Two top
●
Leave the default as Collate or deselect the check box to stop collating.
5. Click Apply.
Step five: Configure the Hole Punch functionality
1. Click the Copy/Print tab.
2. In the left navigation pane, click the Copy Settings link.
ENWW Configure the product for Mailbox Mode or Stacker Mode 79
To Next Page
Loading...