HP LaserJet Enterprise M806 - Page 96

Table 3-4 HP LaserJet Enterprise M806 and HP LaserJet Enterprise flow MFP M830 – Supported custom paper sizes (continued)
Custom paper sizes supported
Custom size range
1
Non-shift Shift (offset) Staple Booklet Punch
Feed direction
minimum
191 mm (7.5 in) 191 mm (7.5 in) - - -
Feed direction
maximum
635 mm (25 in) 432 mm (17 in) - - -
1
Custom size is not available for stapling, hole punching, or booklet.
Table 3-5 HP LaserJet Enterprise M806 and HP LaserJet Enterprise flow MFP M830 – Supported paper types for stapling for Bin 1
and Bin 2
Paper size Number of sheets (one and two staples)
Small sheets
1
Large sheets
2
Plain 50 30
HP EcoFFICIENT 50 30
Light 60-74 g 50 30
Mid-weight 96-110 g 18 11
Heavy 111-130 g 18 9
Extra heavy 131-175 g 12 6
Letterhead 50 30
Preprinted 50 30
Prepunched 50 30
Colored 50 30
Bond 50 30
Recycled 50 30
Rough 50 30
Intermediate 85-95 g 50 30
Heavy rough 18 11
1
Small sheets: Feed direction < 221 mm.
2
Large sheets: Feed direction >= 221 mm.
Table 3-6 HP LaserJet Enterprise M806 and HP LaserJet Enterprise flow MFP M830 – Supported paper types for hole punching for
Bin 1 and Bin 2
Paper type Offset 2/3 Hole punch 2/4 Hole punch
2 Hole punch 3 Hole punch 2 Hole punch 4 Hole punch
Plain
HP EcoFFICIENT
Light 60-74 g
88 Chapter 3 Supported paper sizes and types for finishing accessories ENWW