Table 1-59 Saddle stitcher electrical components (2 of 2)
Component type Abbreviation Component name Replacement assembly
Photointerrupter continued PI17 Paper path feed sensor Lower slide rail assembly
FM2-1638-000CN
PI18 Feed sensor 1 Rear end sensor assembly
FM2-0763-000CN
PI19 Feed sensor 2
PI20 Feed sensor 3
PI21 Paper folding home position
sensor
Photointerrupter
WG8-5593-000CN
PI22 Saddle inlet sensor Entrance sensor bracket
assembly
FM2-0717-000CN
Booklet maker motor control
The booklet maker with puncher assembly has three additional motors in the puncher assembly.
Table 1-60 Booklet maker motor specifications
Component name Components driven
M61 Hole punch motor Hole punch assembly
M62 Hole punch feed motor Hole punch feed roller
M63 Side registration motor Hole punch slide assembly
Booklet maker motor failure detection
The stacker controller determines the following motor failures.
Table 1-61 Booklet maker motor failures
Failure detection function Supported feature
Hole punch motor failure detection Yes
Hole punch feed motor failure detection No
Side registration motor failure detection Yes
164 Chapter 1 Theory of operation ENWW
To Next Page
Loading...