Booklet maker basic operation
●
When receiving paper from the stacker unit, the booklet maker unit outputs paper in a vertical
orientation to a vertical path.
●
Two paper-deflecting plates configure the path.
●
The paper-positioning plate sets the position of the paper so that the center of the stack matches
the stapling/folding position.
●
Subsequent paper is output closer to the delivery slot. The volume of paper that can be output is
15 sheets (maximum of 14 sheets of 80 g/m
2
+ 1 sheet of 250 g/m
2
).
Figure 1-130 Paper delivery for booklet maker
Paper positioning plate
First sheet
Second sheet
Direction of
delivery
The alignment plates put paper in order when it is output to the vertical-path assembly. Mounted at
the edge of the-vertical path assembly, alignment plates also prepare the stack for delivery after
stapling.
Figure 1-131 Alignment plates
Sheets
Paper positioning plate
Alignment plate
Alignment plate
ENWW Booklet maker and booklet maker with hole punch 175
To Next Page
Loading...