Table 2-79 Service menu (continued)
First level Second level Value Description
PTT Test Mode
NOTE: M880 product only.
Hook Operations Off Hook
On Hook
Test the internal
modem for the analog
fax accessory.
Generate Random Data Select a value
from the list.
Generate DTMF Tone Burst Select a value
from the list.
Generate DTMF Continuous Tone Select a value
from the list.
Generate Pulse Burst Select a value
from the list.
Generate Tone Dial Number Enter dial
number.
Generate Pulse Dial Number Enter dial
number.
Generate Single Modem Tone Range: 1100–
2100 Hz
Default =
2100 Hz
Line Measurements
Fax Transmit Signal Loss
Test Support Continuous Scan
NOTE: M880 product only.
2-sided
Save to Disk
Service test options.
Continuous Copy 2-sided
Save to Disk
Raw Scan
NOTE: M880 product only.
2-sided
Mechanical
Calibration
Continuous Print from USB
Automatic Calibrations Disabled
Enabled*
Runtime Configuration MercStine
Standard
StandardEIC
Workflow
WorkflowEIC
Reconfigure
ENWW Service mode functions 735
To Next Page
Loading...