3. Insert the USB flash drive into the USB port on
the left side of the product control panel.
NOTE: You might need to remove the cover
from the USB port.
4. You can save the file on the root of the USB
flash drive, or save it in a folder. To save it in
a folder, select one of the folders in the list, or
touch the New Folder button to create a new
folder on the USB flash drive.
5. Enter the name for the file in the File Name:
field. Touch the OK button. Select the file type
from the File Type drop-down list. Touch the
OK button.
154 Chapter 7 Scan/send ENWW
To Next Page
Loading...
