HP LaserJet Enterprise MFP M725 - 3,500-sheet high-capacity tray

3,500-sheet high-capacity tray
3,500-sheet high-capacity input capacity and paper orientation
To prevent jams, do not overfill trays. Be sure the top of the stack is below the tray-full indicator. For
short/narrow and heavy/glossy paper, load paper to less than half of the tray-full indicators.
Table 3-9 3,500-sheet high-capacity input tray capacity
Paper type Specifications Quantity
Paper Range:
60 g/m
2
(16 lb) to 130 g/m
2
(35 lb)
Equivalent to 3,500 sheets of 75 g/m
2
(20
lb)
Table 3-10 3,500-sheet high-capacity input tray paper orientation
Single-sided printing Automatic duplex printing and
Alternative Letterhead Mode
Envelopes
Face-up
Top edge at the back of the tray
Face-down
Top edge at the back of the tray
Print envelopes only from Tray 1.
Load the 3,500-sheet high-capacity tray
The 3,500-sheet high-capacity tray supports only A4 and Letter-size paper.
1. Open the right and left sides of the tray.
4
44 Chapter 3 Input trays and output bins ENWW