HP LaserJet M2727 MFP Series - Page 142

Convenience-stapler power supply (HP LaserJet M2727nfs only)
1. Remove the right cover. See Right cover on page 100.
2. Disconnect one connector (callout 1) at the convenience-stapler assembly, and then remove one
screw (callout 2).
Figure 5-44 Remove the convenience-stapler power assembly (1 of 3)
1
2
3. Remove the sheet-metal strap, and then separate the convenience-stapler power supply from the
chassis.
Figure 5-45 Remove the convenience-stapler power assembly (2 of 3)
124 Chapter 5 Removal and replacement ENWW