3. Remove the DIMM from the antistatic bag it came in, grasping the DIMM on the top edge.
4. With the gold contacts facing upward, insert the DIMM in the DIMM seat and press the DIMM body
in until the metal retaining pins click.
5. Close the DIMM door.
6. Reconnect all cables and cords, and then use the power switch to turn on the product.
7. Print a configuration page, and then verify that the Memory section shows the new memory amount.
See
Information pages on page 142.
ENWW Manage supplies 161
To Next Page
Loading...