11. Reach inside the MFP, lift up on the power supply, and slide it out of the MFP (make sure that
you feed the DC-controller cables through the hole in the chassis as you remove the engine
power supply).
Figure 5-157 Remove the engine power supply (10 of 10)
Paper-feed assembly
1. Remove the engine power supply.
2. Remove three screws (callout 1).
Figure 5-158 Remove the paper-feed assembly (1 of 2)
ENWW Internal assemblies 311
manuals4you.commanuals4you.com
To Next Page
Loading...