Connect to a computer or network
The MFP has five ports for connecting to a computer or a network. The ports are at the left, rear
corner of the MFP.
1 EIO slot
2 Network connection (embedded HP Jetdirect print server)
3 Foreign interface harness (FIH) port
4 High-speed USB 2.0 device port
5 Telephone-line connection (for the optional analog-fax accessory)
USB configuration
This device supports a USB 2.0 connection. You must use an A-to-B type USB cable for printing.
ENWW Connect to a computer or network 27
manuals4you.commanuals4you.com
To Next Page
Loading...