HP LASERJET M5025 - Page 321

Custom paper sizes
The following table shows custom paper sizes that are available for the HP LaserJet M5025/M5035 MFP.
Table 7-9 HP LaserJet M5025/M5035 MFP – Custom media sizes
Tray Dimensions Minimum Maximum
Tray 1 (100-sheet
multipurpose)
Width 76 mm (3.0 inches) 312 mm (12.28 inches)
Height 127 mm (5.0 inches) 470 mm (18.5 inches)
Tray 2 (250-sheet) Width 148.0 mm (5.83 inches) 297 mm (11.7 inches)
Height 210 mm (8.27 inches) 364 mm (14.3 inches)
Tray 3 (500-sheet, optional) Width 148.0 mm (5.83 inches) 297 mm (11.7 inches)
Height 210 mm (8.27 inches) 432 mm (17 inches)
Tray 4 Width 148.0 mm (5.83 inches) 297 mm (11.7 inches)
Height 210 mm (8.27 inches) 432 mm (17 inches)
Tray 5 Width 148.0 mm (5.83 inches) 297 mm (11.7 inches)
Height 210 mm (8.27 inches) 432 mm (17 inches)
Tray 6 Width 148.0 mm (5.83 inches) 297 mm (11.7 inches)
Height 210 mm (8.27 inches) 432 mm (17 inches)
Duplexing unit Width 148.0 mm (5.83 inches) 297 mm (11.7 inches)
Height 210.0 mm (8.26 inches) 432 mm (17 inches)
HP 500-Sheet Stapler/
Stacker
Width 216 mm (8.5 inches) 211 mm (8.3 inches)
Height 279 mm (11.0 inches) 297 mm (11.69 inches)
NOTE The envelope feeder or the HP 500-Sheet Stapler/Stacker do not support custom media
sizes.
Media-type commands
The HP PCL 5 driver escape sequence for paper type is "Esc&n#Wdpapertype", where "n#" is the
number of characters in the paper type plus 1. For example, in the sequence "Esc&n6WdPlain", "Plain"
has 5 letters plus 1, for a total of 6.
Table 7-10 HP LaserJet M5025/M5035 MFP – Media-type commands
Esc& n# Wd Paper type
Esc& 6 Wd Plain
Esc& 11 Wd Preprinted
Esc& 11 Wd Letterhead
Esc& 13 Wd Transparency
Esc& 11 Wd Prepunched
ENWW Media attributes 301
Engineering Details