Menu item Sub-menu item Sub-menu item Values Description
Paper Path Test
Test Page
Print (button) Generate a test page for testing paper
handling features. You can define the path
that is used for the test in order to test specific
paper paths.
Source All trays
Tray 1
Tray 2
(Additional trays are
shown, if applicable.)
Specify whether the test page will be printed
from all trays or from a specific tray.
Destination A list of output bins
appears.
Select the output option for the test page. You
can choose to send the test page to all output
bins or only to a specific bin.
Duplex Off (default)
On
Select whether the duplexer should be
included in the Paper Path test.
Copies 1 (default)
10
50
100
500
Select how many pages should be sent from
the specified source as part of the Paper Path
test.
Table 2-16 Troubleshooting menu (continued)
ENWW Use the Administration menu 51
To Next Page
Loading...